Battery Grade Lithium Chips for Coin Cells, 99.95% Purity

Lithium chips are widely used in battery research, particularly for Li-ion and Li-Metal batteries. Most half-cells for materials research and evaluation use lithium as the anode.  Lithium chips with a 15.6 mm Diameter and 0.45 mm are popular for CR20XX coin cells, especially for CR2032/CR2025 coin cells. Here are some key points:

• Reactivity: Lithium is very reactive in air, so lithium chips must be handled inside a glove box with Argon Gas and moisture less than 2%RH.
• Safety: Due to the reactive nature of lithium, it should be handled with care, and appropriate safety measures should be taken.

Please note that this information is based on general practices and may vary depending on specific applications and requirements. Always consult a professional or research advisor when handling lithium for battery research.

Chemical Composition (% Max by weight)

The number of pieces is calculated based on the weight and density of lithium. The diameter and thickness of lithium can be customized upon request. 

The lithium chips (flakes) are packed in a sealed tinplate can filled with inert argon. It is wrapped and sealed again with an aluminum plastic bag. The aluminum-plastic bag was filled with dry air. Please open the aluminum plastic bag outside the glove box and put the whole metal can into the antechamber for vacuuming. Do not put the sealed aluminum bag into the glovebox. It may explode during the vacuuming in the antechamber. And the dry air inside the bag will contaminate the atmosphere inside the glovebox.