Post

Downloads

First, check if the battery test systems could be turned on: Plug it in, and turn on the power switch. Check if there is flashing of the 8 channel indicators. If yes that means the power is on, then go to the next step. Otherwise, contact customer support. Second, check if the serial port is

A battery can be regarded as an ideal voltage source in series with an impedance, which is called internal resistance. When the battery works, the voltage output is lower than the open-circuit voltage (abbreviated as OCV). The difference is the voltage drop caused by the internal resistance.  The internal resistance is measured by ohm (Ω). The

Re-assign unit number for battery testers The program does not allow two testers to have the same unit number (Box No.). If two testers have the same Unit No., at least one could not be recognized by the computer. In the advanced setup of the LANDCali, Unit No. can be re-assigned. The Current and Voltage

One may encounter the problem that battery cell cycler software upgrade is needed, but there are still tests ongoing on the channels of the battery cell cyclers. The software could be updated without losing all the settings. After the update, the ongoing tests can be resumed. You don’t need to manually restart the battery cyclers