Coin Cell Disassemble Machine LT-CX120 is a coin cell disassembler with a lighter weight and a smaller footprint. The coin cell disassembling machine is suitable for disassembling various types of coin cells, such as CR2032, CR2025, and CR2016, without destroying the internals of the cell in order to study the materials inside. It can also disassemble CR2325 and CR2450 with other special-size cases with optional die sets. In addition, customers can easily replace the original die for crimping purposes. LT-CX120 is designed for operations outside a glove box. It is mainly used in the laboratory to disassemble button batteries for picking up and researching. Different molds can also be used for battery sealing, pole piece pressing, and battery powder cake pressing.
SPECIFICATIONS:
| Standard Disassembling Die | One set of disassembling die for CR2032, CR2025, & CR2016 cells PTFE Anti-Corrosion Core prevents coin cells from being short-circuited. The die is consumable. |
| Pressure | Max. 8 metric Ton hydraulic with automatic return The pressure gauge reading of normal button battery removal pressure is about 80~100kg/cm2, and the machine has been set at 80~100kg/cm2-100kg/cm2 before leaving the factory. If a higher pressure is required in special circumstances (the maximum pressure is 200kg/cm2, about 8 tons of pressure), it can only be adjusted after consulting the manufacturer. |
| Structure | When the machine is not disassembled manually, the handwheel of the oil unloading valve is loosened to return the movable template to its original position. If the dismantling machine is not used for a long time, spray rust oil for protection. Regularly check the screws, nuts, pins, and other fasteners on each part of the manual dismantling machine to prevent loosening and prevent quality accidents and personal accidents of the dismantling machine. Electrolytes are highly corrosive materials. Therefore, the die set must be cleaned with ethanol after the completion of each experiment in order to avoid any corrosion damage. Also, turn the hydraulic valve to the Lock position when not in use. Please be aware of that we will not be liable for any losses/damages from improper use, improper care & maintenance, and abuse of the product. |
| Product Dimensions | 232mm*190mm*330mm |
| Warranty | Electrolytes are highly corrosive materials. Therefore, the die set must be cleaned with ethanol after the completion of each experiment in order to avoid any corrosion damage. Also, turn the hydraulic valve to the Lock position when not in use. Please be aware that we will not be liable for any losses/damages from improper use, improper care & maintenance, and abuse of the product. A 13″x 9″ 12-gauge commercial-grade aluminum tray is included to keep the workstation clean in case of an oil leak. |
| Net Weight | 30kg |
| Maintenance & Equipment Ca | Heavy Duty Steel Platform A built-in safety overflow oil valve and pressure gauge prevent damage caused by excessive pressure or misoperation, which ensures the safety of the machine. Hydraulic drive (pressure up to 8T) Precise mold design |
| Warranty | Attention: The built-in small hydraulic pump is not designed for holding high pressure. The pressure inside will be released gradually after reaching 50~80 Kg/cm^2 (which is sufficient for disassembling the coin cell). Access the Over-pressure limit screw by removing the front panel. During operation, it is strictly forbidden to extend hands and other parts to the dangerous areas of guide pillars, slide plates, and disassembly work to cause personal injury. Two or more persons are not allowed to operate to avoid accidental injury. |
| Application Notes | When the machine is not disassembled manually, the handwheel of the oil unloading valve is loosened to return the movable template to its original position. If the dismantling machine is not used for a long time, spray rust oil for protection. Regularly check the screws, nuts, pins, and other fasteners on each part of the manual dismantling machine to prevent loosening and prevent quality accidents and personal accidents of the dismantling machine. Electrolytes are highly corrosive materials. Therefore, the die set must be cleaned with ethanol after the completion of each experiment in order to avoid any corrosion damage. Also, turn the hydraulic valve to the Lock position when not in use. Please be aware that we will not be liable for any losses/damages from improper use, improper care & maintenance, and abuse of the product. |
| Warnings | When the machine is not disassembled manually, the handwheel of the oil unloading valve is loosened to return the movable template to its original position. If the dismantling machine is not used for a long time, spray rust oil for protection. Regularly check the screws, nuts, pins, and other fasteners on each part of the manual dismantling machine to prevent loosening and prevent quality accidents and personal accidents of the dismantling machine. Electrolytes are highly corrosive materials. Therefore, the die set must be cleaned with ethanol after the completion of each experiment in order to avoid any corrosion damage. Also, turn the hydraulic valve to the Lock position when not in use. Please be aware that we will not be liable for any losses/damages from improper use, improper care & maintenance, and abuse of the product. |
Reviews
There are no reviews yet.